logo 公司簡介 bg 工廠簡介 bg 設備簡介 bg 產品介紹 bg 相關連結 bg 網站導覽
home 回首頁

初級濾網中效率濾網高效率濾網無塵室濾網系列化學濾網系列無塵室設備系列 專業服務

 無塵室濾網系列 > 終端拋棄型濾網箱組 AR602
icon 終端拋棄型濾網箱組 Terminal (Module) Filter English

High Quality Construction in a Highly Versatile Design.
Terminal Filter Modules are designed for standard T- bar ceiling grids or Gel seal ceiling grid system use. It's easy and simple to install and maintain these thin and lightweight units.
The module can be flexibly designed to meet customer spec’s demand. By selecting among pack depth, media efficiency, air capacity and inlet size, the clean room designer can configure the unit to meet spec requirements and operating cost.
Depending on the number of units used in the ceiling, the rate of air recirculation and clean room overall design, Airrex Terminal Filter Modules is able to provide cleanliness levels from Class 1 to Class 100,000.

The unique Benefits:
※To eliminate the concern of air blockage is better than Deep Pleat Type Air Filer.
※With Anticorrosive and Anodized Extruded Aluminum Housing Construction.
※Four (4) suspending holes to provide seismic protection and reduce the stress load of grid.
※Dimpled inlet collars help to secure the HVAC ductwork and prevent slippage.
※100% quality control- every unit is tested and certified to meet efficiency and pressure drop requirements.

Factory Testing
Airrex tests all terminal filter modules to be in accordance with the International Environmental Science recommended particles standard. Test result including of penetration value (%) and pressure drop (inch/w.g.) will be recorded on filter label and carton label.

Capacity vs Pressure Drop
The EN 1822 Test Machine examines each filter's Capacity vs. Pressure Drop. Capacity test is according to volumetric parameters, i. e., 100 CFM per square foot of filter face area, which is an expression of the volume of air moving through the filter.

Scan Test
In addition to the efficiency test and penetration test, by using a laser particle counter to scan each filter surface and edge to examine any pinhole leakage. Readings greater than 0.01% of the upstream concentration are determined as unacceptable; the filter must be rejected or repaired and retested.

According to European Standard EN1822, by testing the particle concentration of upstream & downstream area, efficiency is from 99.99% to 99.999% @0.3 micron (H13-14) size particles HEPA filter; and 99.999% - 99.999999% @ 0.1-0.2 micron (U15-U17) size particles ULPA Filter.

Media is made from ultra fine glass fiber formed with high density papers. Each pleat is spaced by hot-melt adhesive to allow air flow through the filter with minimum resistance.

Housing Material:
Anodized Extruded Aluminum construction. Inlet size is available for 8”-14”. Total Height is 150 mm excluding of the height of Inlet. Height of Inlet is 80mm. Material of upper casing is 1.0mm thickness Painted Steel.





icon Performance Data – Terminal Filter Modules (Mini Pleat Series)
iconpdf A4 型錄下載 DOWNLOAD PDF( AR602) BACK
logo bg 台北公司:23148新北市新店區中正路558號4樓 mail TEL:+886-2-2218-1858 FAX:+886-2-2218-2116
南投工廠:54067南投縣南投市南崗三路17號 TEL:+886-49-2251333 FAX:+886-49-2252225
中國工廠:213212江蘇省金壇市經濟開發區良常路92號 TEL:+86-0519-80193100-8003
bg 參觀人數: